PM2.5
µg/m³Now · in the moment
The level of fine PM2.5 particles in the room, updated live. It is the first reading physicians and patients look at on the screen.
The highest value recorded during the day, together with the exact time it occurred.
MG1000 Air and Surface Sterilization System
More than 30 years of experience in air and surface purification and disinfection solutions. The MG system combines medical-grade sterilizers with a monitoring center that watches over the air quality of every room, all day, every day.
Starting today · For physicians and patients
Until now, the air quality in an operating room, an intensive care unit or a patient room could not be seen. It was assumed, sensed — but never known in the moment. That has changed: today, physicians can see the quality of the air that they and their patients are breathing, in real time.
And Ecoviox MG does not stop at showing it: while you watch the state of the room, the unit is working to resolve any air quality issue that arises, continuously.
Air quality is no longer invisible. On the room's screen, from the hospital's Monitoring Center, from a mobile device or from a computer — from any device — physicians and patients can check, in the moment, the air they are breathing.
The system detects the issue and acts on it. It sterilizes the air and surfaces continuously, with the room in use, without waiting for the next scheduled cleaning.
A monitoring system that runs 24 hours a day, 7 days a week, with artificial intelligence — watching over every room, recording its evolution and alerting on any deviation.
Round-the-clock answers to questions from physicians and patients, and the Ecoviox Observatory updated immediately at ecoviox.com, so information is always available in a timely way.
Live metrics · What the client sees
This is exactly what the institution can see about its own environment in real time — from the hospital's Monitoring Center, from a mobile device, from a computer, from any device. The system's same four real measurements, always with their unit and their moment.
Now · in the moment
The level of fine PM2.5 particles in the room, updated live. It is the first reading physicians and patients look at on the screen.
The highest value recorded during the day, together with the exact time it occurred.
Now · in the moment
The carbon dioxide concentration in the room, in parts per million, updated live: a direct signal of ventilation and occupancy in the area.
The highest value recorded during the day, together with the exact time it occurred.
Now · in the moment
The room's indoor temperature, live, as part of the same metrics panel available on all three screens.
Now · in the moment
The room's indoor humidity, live, alongside the temperature: the two comfort and control conditions that complete the reading of the air.
The history curves show how CO₂ and PM2.5 evolved, and — on their own curve — indoor temperature and humidity. The Day view follows the current day; Month shows daily averages; Year shows monthly averages. Tapping a point on the curve shows its value and its time.
Each function shows whether it is on or off, and from any device the unit can also be operated remotely: turbine, Viox UVC lamps, ionization and O3.
When a curve is tapped — the CO₂ and PM2.5 curve, or the temperature and humidity curve — the system explains out loud how the metrics behaved over the selected period and when the point that needs attention occurred. No spreadsheets to interpret: the room's evolution, narrated.
History · The curves in real time
The units are monitored in real time from the hospital's Monitoring Center, from a mobile device, from a computer — from any device. From there, the institution opens the history and sees the evolution of the day, the month and the year. At the top, the current PM2.5 and CO₂ readings with the peak of the day and its time; below, the curves showing how each metric behaved throughout the day.
These curves make it possible to follow the monitoring of the units and to spot, from the times of the peaks, possible cross-contamination ingress events — and then work on resolving them.
The hospital can download the metrics report for its rooms from the system: the history of readings recorded every 15 minutes, with the last 30 days available — PM2.5, CO₂, indoor temperature and humidity, with their times.
That report helps on two fronts. On the one hand, it supports the monitoring of the units: it makes it possible to verify their operation over time, room by room. On the other, it makes it possible to detect possible cross-contamination ingress at different times — for example, by observing carbon dioxide peaks and other factors at certain times of day — and then work on resolving them based on what the metrics themselves show.
The screens shown in this presentation are illustrations of the system's interface. The values each institution sees are always those of its own environment, read live by its own units.
The unit
A medical-grade sterilizer that is installed on the wall of the room and works continuously, with the area in use. No front display: all of the unit's information lives in its monitoring cabinet and in the central system.
The MG1000 on the wall of the surgical area, with its monitoring cabinet — white and narrow, flush against the wall — showing the state of the environment.
The unit works around the clock with the patient in place and staff attending: continuous sterilization without interrupting care.
The unit's technologies
The MG1000 is not just another purifier: within the same unit, the technologies that sterilize the air, disinfect surfaces and measure the environment work together, continuously. Here they are, one by one.
Fast-start germicidal ultraviolet radiation. They are precisely installed to irradiate the HEPA filters directly: they inactivate any microorganism lodged in the filters, preventing biofilm from forming and returning to the environment. It is the heart of the air sterilization process.
The Viox UVC lamps generate ozone in programmed cycles — every so many hours, for a few minutes — and the unit adds it to its already sterilized air. In this way it also disinfects the room's surfaces, progressively and continuously, 24 hours a day, even with people present and without chemicals.
The built-in ionizer acts on the particles suspended in the room's air and complements the work of the Viox UVC lamps. Its status — on or off — can be viewed and operated from the monitoring system, just like the unit's other functions.
The HEPA filters retain the particles and microorganisms in the air circulating through the unit — the same ones the Viox UVC lamps keep inactivated by irradiating them directly — and the activated carbon stage purifies the residues of the process, including the residual ozone from O3 Control mode, so the air that returns to the room comes out clean and odor-free.
Integrated sensors continuously measure PM2.5, CO₂, indoor temperature and indoor humidity in each room. Those readings feed the system's real-time monitoring and recorded history.
Day mode and Night mode programs, a high-flow turbine — up to 1100 m³/h — and remote operation of each function: turbine, Viox UVC lamps, ionization and O3. All of it from the hospital's Monitoring Center, a mobile device, a computer or any device.
Technical specifications
The unit's specifications, exactly as they come from the factory: a compact sterilizer with low power consumption and a reduced sound level, designed to work continuously in rooms of up to 60/75 m².
MG1000 IOT Control, wall-mounted. No front display: information and control live in the monitoring cabinet and in the central system.
The starting point
In an operating room, an intensive care unit or an inpatient room, air quality and the state of surfaces are part of patient care. The problem is that, without continuous measurement, no one really knows what condition each room is in between one cleaning and the next.
Without permanent sensors, the air quality of a critical area depends on sporadic checks and on staff perception.
Countertops, equipment and contact surfaces are exposed again as soon as the scheduled manual disinfection ends.
Faced with an audit or an infection control committee, what is not recorded and measured is very hard to demonstrate.
The system
At the heart of Ecoviox MG is a central air quality monitoring system, with multiple synergistic sensors that generate information for every unit installed in the institution. Tap each component to learn more.
It receives information from the sensors and from each installed unit, both at the institution and at Ecoviox's technical team.
The system's core units: they sterilize the air and surfaces of operating rooms, intensive care units and critical areas continuously, 24 hours a day, with the room in use.
Real-time monitoring
The institution monitors its units in real time through its own access — from the hospital's Monitoring Center, from a mobile device, from a computer, from any device — and Ecoviox supports it with its own monitoring center. If a unit disconnects or is switched off, the system detects it and sends an alert; when it recovers, it reports that too.
This is what the monitoring center screen looks like: each room with its unit and its status. Each institution accesses only its own units, in read-only mode.
From any device, the institution follows the status of its units in real time, without depending on manual rounds.
Readings are recorded every 15 minutes, with history available to review the evolution of each room.
When a unit is disconnected or switched off, the alert reaches Ecoviox and the institution — and alerts again when the unit recovers.
Ecoviox's technical team can operate the unit's functions remotely, responding without waiting for a visit.
The same real-time information, wherever each person needs it: from the hospital's Monitoring Center, from a mobile device, from a computer — from any device — in addition to the screen in the room.
The monitoring cabinet's screen, installed on the wall of the room: PM2.5, CO₂, temperature and humidity in the moment, and the status of each of the unit's functions.
From a mobile device, each unit can be seen live, with its metrics, and the turbine, the Viox UVC lamps, ionization and O3 can be operated remotely.
The Monitoring Center brings every room and unit together on a single screen, for the institution and for Ecoviox's technical team.
The Ecoviox difference · Patented technology
O3 Control mode disinfects surfaces in stages, progressively and continuously, 24 hours a day, even with people present in the room. It is a difference no other unit on the market offers in this way: chemical-free surface disinfection, integrated into the same unit that sterilizes the air.
Where it works
The MG system is installed where air quality leaves no room for improvisation.
The environment where control of air and surfaces is most critical for the patient and the surgical team.
Vulnerable patients, prolonged stays and continuous monitoring: the MG system's natural setting.
Environments that require controlled conditions and a permanent record of their state.
Backing
Ecoviox is a technology developed jointly between the United States and Argentina, with its own laboratories and supply in both countries.
In addition to its own two laboratories — in the USA and in Argentina — the technology has undergone microbiological testing at prestigious independent institutions:
To review the complete results, request the evidence dossier.
The technology is being evaluated under real conditions of hospital use, in a scientific trial in real-world use at Hospital de Clínicas, the teaching hospital of the University of Buenos Aires.
Some of the institutions that trust our system already have it installed and monitored in their critical areas: Hospital de Clínicas de Buenos Aires, Hospital Roffo, Hospital Lanari, Instituto César Milstein, Instituto Alexander Fleming, Hospital Italiano de Buenos Aires, Sanatorios de la Trinidad and Hospital de Clínicas de Paraguay, among other leading institutions internationally that trust our system.
Impact for the institution
Beyond the health benefits, a system that works on its own, all day long, changes the daily economics of critical areas.
Sterilization and surface disinfection run continuously and automatically, without depending on manual cycles repeated throughout the day.
A unit that is off or disconnected is detected in the moment, not on the next round: less time with the area unprotected and fewer avoidable emergencies.
The recorded history of each room supports the infection control committee and management in audits, without hand-built spreadsheets.
How it starts
We visit the institution, evaluate the critical areas and define which units each room needs.
We install the MG units and connect them to the central monitoring system, with the institution's own access.
From that day on, every unit is watched over 24 hours a day, with alerts, history and the backing of Ecoviox's technical team.
Let's arrange an assessment visit and a presentation of the MG system designed for your critical areas.